Huawei Maxis Wi-Fi 6 - User Manual

1
How to use Wi-Fi 6 Router as Wi-Fi 6
EasyMesh
Whole Home Wi-Fi Coverage with mesh Wi-Fi
Get stronger, faster Wi-Fi connection in every room by pairing 2 or more Maxis Fibre.
Step 1
Connect the power cord to the Maxis Wi
-
Fi 6 Router and wall socket. Do the same
for the Maxis Wi
-
Fi 6 EasyMesh.
Turn on the power at the wall and on the
Maxis Wi-Fi 6 Router and
Maxis Wi-Fi 6
EasyMesh.
Take a break for a minute and wait for the indicators to come on.
Connect the Power Cord
Note: Do not access the web page of the Maxis
Wi-Fi
6 EasyMesh after it is
powered on; otherwise, Maxis
Wi-Fi
6 EasyMesh will fail to switch to the bridge
mode.

Huawei Maxis Wi-Fi 6 Specifications

General

Brand	Huawei
Model	Maxis Wi-Fi 6
Category	Wireless Router
Language	English

Summary

Whole Home Wi-Fi Coverage with Mesh Wi-Fi

Connect the Power Cord

Connect Maxis Wi-Fi 6 EasyMesh to Maxis Wi-Fi 6 Router

Device Power and Placement

Ensure both Wi-Fi 6 Router and EasyMesh are powered on and placed 1-2 meters apart to avoid interference during pairing.

Initiate Pairing Sequence

Press the WLAN/WPS button on EasyMesh for over 10 seconds, then press the Router's WLAN/WPS button for 1-2 seconds.

Connection Confirmation

Wait for EasyMesh to restart, indicators to turn off, then the Internet indicator to be steady on, confirming bridge mode connection.

Select the Best Location for your Maxis Wi-Fi 6 EasyMesh

Optimal Placement Guidelines

Place EasyMesh 1-2 rooms away, avoiding corners, electronics, and metal objects, halfway between deadspots and the Router.

Connect to the Wi-Fi Network

Factory Reset Procedure

Press the reset button for over 6 seconds to restore devices to factory settings, resetting Wi-Fi and Web UI credentials.