Huawei ME909s-120 - Label Inspection; Performance Inspection

HUAWEI ME909s-120 LTE LGA Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8

Check whether the six rings on the humidity indicator card are all brown, as shown in
Figure 2-4 .

Check that the arrangement of modules is consistent with that shown in Figure 2-4 .

Check that the number of modules is consistent with that labeled on the large carton.

After the vacuum bag is removed for inspection, repack the modules in a vacuum bag to
ensure the quality when the modules deliver to the customer.
2.2 Label Inspection
Figure 2-5 ME909s-120 LGA label

Check whether the information on the label of an ME909s-120 LGA module is consistent
with the corresponding label shown in Figure 2-5 . If the label is customized, see the
approval sheet.

Use a 2D barcode scanner to read the 2D barcode and check whether the number read
from the barcode is consistent with the IMEI number printed on the label.

It is recommended to take ESD protection during the inspection, for examlple, wearing ESD
wrist straps, ESD gloves, or ESD finger cots.
2.3 Performance Inspection
Testing tools: USB cable, development kit and PC
Testing system: Windows 8/Windows 8.1
The following is the procedure: