•Use only the following listed AC Adapters/Power Supplies:
HUAWEI: HW-050200U01, HW-050200E01,
HW-050200B01,HW-050200A01.
Charger safety
•For pluggable devices, the socket-outlet shall be installed near the
devices and shall be easily accessible.
•Unplug the charger from electrical outlets and the device when
not in use.
•Do not drop or cause an impact to the charger.
•If the power cable is damaged (for example, the cord is exposed
or broken), or the plug loosens, stop using it at once. Continued
use may lead to electric shocks, short circuits, or fire.
•Do not touch the power cord with wet hands or pull the power
cord to disconnect the charger.
•Do not touch the device or the charger with wet hands. Doing so
may lead to short circuits, malfunctions, or electric shocks.
•If your charger has been exposed to water, other liquids, or
excessive moisture, take it to an authorized service center for
inspection.
•Ensure that the charger meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1/UL60950-1 and has been tested and
approved according to national or local standards.
•Connect the device only to products with the USB-IF logo or with
USB-IF compliance program completion.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
