Parameter Description
Health Status Indicates whether the consistency group is
functioning normally. The values include:
l Normal: The consistency group is
functioning normally. You can perform
the synchronization operation.
l Fault: The consistency group
malfunctions or the replication link is
down, you cannot perform the
synchronization operation.
Running Status Indicates the consistency group is running
properly. The values include:
l Normal: Consistency group has
completed synchronization successfully.
l Synchronizing: Pair is synchronizing
data.
l Split: Consistency group is in the split
status, and the synchronization is
suspended.
l Interrupted: The remote replication
internal I/O error or the replication link
is down, and you cannot perform the
synchronization operation temporarily.
l To be recovered: After the remote
replication internal I/O error is rectified
or the replication link is up, and if
Recovery Policy is Manual, the
consistency group enters this status. You
need to manually start synchronization
for the consistency group to synchronize
data.
l Invalid: Consistency group is useless
and cannot be restored in this status,
except deleting it. You must delete the
consistency group on both primary and
secondary storage devices. Otherwise,
the consistency group creation may fail.
OceanStor V3 Series
Remote Replication Feature Guide for Block
7 Managing Consistency Groups
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
124
To Next Page
Loading...
