9.16 Why the Secondary LUN Is not Displayed When the
Remote Replication Pair Is Created
Question
Why the secondary LUN is not displayed when the remote replication pair is created?
Answer
When the remote replication pair is created, the system automatically filters secondary LUNs
that can be used to create remote replication pairs. Secondary LUNs that have different
capacity with the primary LUNs (calculated in blocks), or LUNs that are mapped to the host
are all filtered out. Locate and rectify the cause. If the secondary LUN is still not displayed
when the remote replication pair is created, contact technical support engineers.
OceanStor V3 Series
Remote Replication Feature Guide for Block
9 FAQs
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
165
To Next Page
Loading...
