Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose Data Protection > Remote Replication > Remote Replication
Consistency Group.
Step 3 Right-click the desired consistency group and choose Delete.
The security alert dialog box is displayed.
Step 4 Confirm the operation of deleting the consistency group.
1. Optional: Select Only delete the configuration information about the local device if
the local device is disconnected from the remote device based on the situation.
NOTE
– This option is applicable to scenarios where the physical link between the local storage system and
remote storage system is disconnected. In such scenarios, this option is mandatory. Otherwise, the
pair cannot be deleted.
– If you want to delete the configuration information of the consistency group from the remote
storage device, you must perform this operation in the remote storage system.
– If the physical link is normal, do not select this option.
2. Carefully read the contents of the dialog box. Select I have read and understand the
consequences associated with performing this operation. and click OK to confirm the
information.
The Success dialog box is displayed indicating that the operation is successful.
3. Click OK to complete deleting the consistency group.
----End
OceanStor V3 Series
Remote Replication Feature Guide for Block
7 Managing Consistency Groups
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
145
To Next Page
Loading...
