Huawei OceanStor 2200 V3 - Page 156

Parameter Description Setting
Running Status Operating status of a remote
link.
[Example]
Connected
Owning Device Remote storage device
which a remote link belongs
to.
[Example]
testname1
Local Controller Owning controller of the
local storage device.
[Example]
CTE0.A
Local Port Fibre Channel port of the
local storage device.
[Example]
CTE0.A.IOM0.P0
Remote Controller Owning controller of the
remote storage device.
[Example]
XXX1.A
Remote Port Fibre Channel port of the
remote storage device.
[Example]
XXX1.A4.P1
Bandwidth Limit Whether or not to limit the
data transfer rate of a link.
[Example]
No
Bandwidth Size Maximum data transfer rate
of a link.
[Example]
--
Bandwidth Usage (%) Usage of the link
bandwidth.
[Example]
--
Local Port WWPN Unique identifier of the
local Fibre Channel port.
[Example]
22019c37f48fXXXX
Remote Port WWPN Unique identifier of the
remote Fibre Channel port.
[Example]
22019c37f496XXXX
Table 8-3 Information about iSCSI links of the remote storage devices
Parameter
Description Setting
Link ID ID of a remote link. [Example]
8
Health Status Health status of a remote
link.
[Example]
Normal
Running Status Operating status of a remote
link.
[Example]
Connected
OceanStor V3 Series
Remote Replication Feature Guide for Block
8 Managing Remote Devices
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
148