Parameter Description Value
Recovery Policy After the remote replication internal I/O
error is rectified or the replication link is
up, the remote replication pair
automatically synchronizes data or not.
The values include:
– Manual: The pair enters the To be
recovered state. You need to
manually synchronize the data from
the primary resource to the secondary
resource in the pair.
– Automatic: The pair enters the
Synchronizing state. The system
will automatically synchronize the
data from the primary resource to the
secondary resource in the pair.
(default value)
[Default value]
Automatic
OceanStor V3 Series
Remote Replication Feature Guide for Block
3 Configuring Remote Replication
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
48
To Next Page
Loading...
