3. Create the secondary LUN in the storage pool.
A storage pool cannot be identified by hosts. The host can use the storage space only
when the storage space of the storage pool is divided into LUNs.
On the navigation bar of the DeviceManager, click
Provisioning. And on the
Block Storage Service area, click LUN to create a secondary LUN. The secondary LUN
must have the same capacity as the primary LUN (500 GB). Otherwise the system
cannot detect the created secondary LUN when you are adding a secondary LUN.
OceanStor V3 Series
Remote Replication Feature Guide for Block
4 Configuration Example
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
85
To Next Page
Loading...
