Parameter Description Value
IP Address Failover After IP address failover is
enabled, services are failed
over to other normal ports
within the failover group if
the primary port fails.
However, the IP address
used by services remains
unchanged.
NOTE
Shares of file systems do not
support the multipathing
mode. IP address failover is
used to improve reliability of
links.
[Example]
Enable
Failback Mode Mode in which services fail
back to the primary port
after the primary port is
recovered. The mode can be
manual or automatic.
NOTE
l If Failback Mode is
Manual, ensure that the
link to the primary port is
normal before the failback.
Services will manually fail
back to the primary port
only when the link to the
primary port keeps normal
for over five minutes.
l If Failback Mode is
Automatic, ensure that the
link to the primary port is
normal before the failback.
Services will auto fail back
to the primary port only
when the link to the
primary port keeps normal
for over five minutes.
[Example]
Automatic
Activate Now To activate the logical port
immediately.
[Example]
Enable
Role Role of the logical port. [Example]
Service
Dynamic DNS When the dynamic DNS is
enabled, the DNS server will
automatically and
periodically update the IP
address configured for the
logical port.
[Example]
Enable
OceanStor V3 Series
HyperMetro Feature Guide for File
4 Configuration
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
113
To Next Page
Loading...
