Table 5-2 HyperMetro pair parameters
Parameter Description
Local Resource Name Name of a local resource.
Local Resource ID ID of a local resource.
Remote Resource Name Name of a remote resource.
Remote Resource ID ID of a remote resource.
Pair ID ID of a pair of local and remote resources in
a HyperMetro pair.
Pair Health Status Health status of a pair of local and remote
resources in a HyperMetro pair. The value
can be Normal or Fault.
Pair Running Status Running status of a pair of local and remote
resources. The value can be Normal, To Be
Synchronized, Paused, Synchronizing,
Force Start, or Invalid.
Link Status Status of a link connected to a HyperMetro
pair.
Local Resource Role Whether the site is a primary or preferred
site. The value can be Preferred or Non-
preferred.
Activation Status Activation status of site. The value can be
Active or Passive.
Configuration Status Whether primary and secondary site
configurations are synchronized. The value
can be Synchronizing, Normal, or To Be
Synchronized.
Recovery Policy A recovery policy supports the following
recovery modes:
l Manual: If a HyperMetro pair is in the
To Be Synchronized state, management
and maintenance personnel must
manually synchronize data between the
local and remote resources.
l Automatic: If a HyperMetro pair is in
the Synchronizing state, the system
automatically synchronizes incremental
data from the primary resource to the
secondary resource.
Local Resource Data Status Data status of a local resource.
Remote Resource Data Status Data status of a remote resource.
Local Resource Host Access Status Data read/write status of a local resource.
OceanStor V3 Series
HyperMetro Feature Guide for File
5 Management
Issue 05 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
137
To Next Page
Loading...
