11
Connecting NVMe disk enclosures to Dorado5000 V3 (NVMe) (Applicable only to V300R002C10 and later)
Dorado5000 V3 (NVMe) supports only NVMe disk enclosures.
A PCIe port can only connect to one disk enclosure.
Each controller connects to port P0 of a disk enclosure via one cable. That is, each controller enclosure
connects to a disk enclosure via two cables.
The following shows the appearance of the PCIe cable (mini SAS HD 8X). It has two connectors at each end.
Controller enclosure
PCIe cable (mini SAS HD 8X)
To Next Page
Loading...
