3a
A generic view of cable connections on the controller enclosure
3 Connecting Cables
8
When the storage system has two controller enclosures configured, connect cables following instructions
in the OceanStor Dorado3000 V3, Dorado5000 V3, and Dorado6000 V3 V300R002 Installation Guide.
3c, 3d, 3e, 3f, and 3g in the figure map to the sections, respectively. (Section 3c is inapplicable to
Dorado5000 V3 (NVMe) V300R002C00, while section 3e is inapplicable if no Dorado NAS unit is used.)
The following figure uses AC power modules as an example to describe cable connection.
3b
(Optional) Connecting ground cables
To Next Page
Loading...
