3
Initializing the Storage System
A generic view of cable connections
(Optional) Connecting ground cables
Connecting the storage system to
the network
Connecting to the maintenance
terminal
Connecting power cables
Checking device installation
Checking cable connections
Switching on external
power supplies
Pressing the power button
on the device
Checking status indicators
Installing front panels
Installation Preparations
Installing
Devices
Connecting Cables
Powering On the
Storage System
Checking Hardware Installation
(Optional) Installing Host Software
Checking installation tools
Checking circuit breakers
Checking components
Planning device installation positions
Removing filler panels from device
installation positions
Determining device installation
positions using installation templates
Installing guide rails
Installing storage devices into the
cabinet
(Optional) Installing disk modules
(Optional) Installing filler panels
Installation Process
Connecting disk enclosures (Inapplicable
to Dorado5000 V3 (NVMe) V300R002C00)
Connecting the Dorado NAS unit
(applicable to V300R002C10 and later)
To Next Page
Loading...
