5b
Pressing the power button on either controller
5d
Checking status indicators on the enclosures
After you have powered on a disk enclosure or the controller enclosure, check that all disks are
working correctly (no alarm/location indicator is steady red).
Power indicator of the controller
enclosure: steady green
Disk alarm/location
indicator: off
Controller enclosure
front view
Controller enclosure
Scenario 1 Turn on the switches of the power
distribution box
Scenario 2 Turn on the switch of the PDU
Front
Front
Rear
Rear
25
Pressing the power button on either engine node
5c
File engine
NOTICE
To Next Page
Loading...
