Do you have a question about the Huawei OceanStor S2600 and is the answer not in the manual?
Model | OceanStor S2600 |
---|---|
Form Factor | 2U |
Power Supply | Redundant power supplies |
Controller Count | 2 |
Max. Number of Supported Hard Drives | 24 |
Operating Temperature | 0°C to 40°C |
Supported Protocols | FC, iSCSI, CIFS, NFS |
RAID Levels | 0, 1, 5, 6, 10, 50 |
Cache Memory | Up to 8 GB |
Storage System Type | Hybrid (supports both HDD and SSD) |
Supported Drive Types | SAS, SATA |
Host Interface | 8 Gbit/s Fibre Channel, 1/10 Gbit/s iSCSI |
Operating Humidity | 10% to 90% |
Explains warning and safety identifiers to ensure user and device safety.
Details safety precautions for Electrostatic Discharge (ESD) prevention.
Covers safety precautions related to laser equipment during installation and maintenance.
Provides guidelines to avoid short circuits caused by metallic tools during maintenance.
Outlines electrical safety precautions to prevent device damage or human injury.
Lists the tools and instruments required for troubleshooting.
Explains how to set up a remote modem for maintenance.
Details how to troubleshoot the product using a process chart.
Guides on observing and recording indicator status to locate faulty modules.
Details fault location through analysis, comparison, and rule-out.
Provides contact details for technical support.
Explains the basic principles for locating faults.
Describes the common methods for locating faults.
Details the method of analyzing alarms for fault diagnosis.
Explains troubleshooting using the component replacement method.
Explains how to handle faults where the RAID group is degraded.
Details how to handle faults where the RAID group is invalid.
Details how to handle faults when the power running/alarm indicator is on.
Explains how to handle faults when the controller alarm indicator is on.
Covers handling faults when the storage system cannot communicate with the AS.
Outlines essential precautions to take when replacing parts.
Provides steps on how to replace a controller module in the system.
Describes the procedure for replacing a power module.