Huawei OceanStor S2600 - Figure 6-11 Remove a BBU Module

Figure 6-11 Remove a BBU module
2
1
3
3
5
4
1
2
Step 3 Remove the black signal cable, as shown in step ② in Figure 6-11.
Step 4 Remove the power cable, as shown in step ③ in Figure 6-11.
Step 5 Remove the three cards on one side of the BBU module from the three slots of the controller
enclosure, as shown in step ⑤ in Figure 6-11.
Step 6 Put the removed BBU module into the ESD-preventive bag.
Step 7 Take the BBU module to be installed from the ESD-preventive bag.
Step 8 Insert the three cards on one side of the BBU module into the three slots slowly, as shown in
step ① to step ② in Figure 6-12.
OceanStor S2600 Storage System
Troubleshooting 6 Replacing Parts
Issue 03 (2010-01-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-17