Huawei OceanStor S2600 - Figure 6-12 Install a BBU Module

Figure 6-12 Install a BBU module
2
3
1
4
2
5
1
3
Step 9 Insert the power cable, as shown in step ③ in Figure 6-12.
Step 10 Insert the signal cable, as shown in step ④ in Figure 6-12.
Step 11 Cover the panel and tighten the screws, as shown in the step ⑤ in Figure 6-12.
----End
Postrequisite
After replacing the BBU module, mark the removed BBU module for later handling.
6 Replacing Parts
OceanStor S2600 Storage System
Troubleshooting
6-18 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2010-01-28)