Need help?Do you have a question about the Huawei OptiX RTN 900 and is the answer not in the manual?
General| Brand | Huawei |
|---|---|
| Model | OptiX RTN 900 |
| Category | Transmitter |
| Language | English |
Read instructions and precautions carefully to minimize accident possibility.
Ensure compliance with local safety regulations when operating the product.
Installation and maintenance must be performed by trained personnel.
Details safety measures related to high-voltage power, RF signals, and working at heights.
Covers grounding, static electricity, and battery handling safety for equipment.
Provides precautions and methods for handling electronic boards safely.
Instructions on how to correctly handle power cable terminals to avoid damage.
Overview of the RTN 900, including front views of different models.
Shows the front appearance and technical specifications of the cabinet.
Displays the left side view of the APM30H cabinet.
Displays the right side view of the APM30H cabinet.
Details the AC power supply structure of the APM30H cabinet.
Details the DC power supply structure of the TMC11H cabinet.
Specifies required dimensions and clearance for cabinet installation.
Illustrates installing cabinets on a base and in stacked configurations.
Step-by-step guide for casting a concrete pad and installing the cabinet base.
Procedures for safely lifting and placing the cabinet onto its installed base.
Instructions on how to secure the cabinet to the base using bolts.
Guide for stacking one cabinet on top of another, securing them together.
Details installing the RTN 900 in an APM30H cabinet with AC power.
Details installing the RTN 900 in a TMC11H cabinet with DC power.
Covers RTN 900 installation in APM30H/TMC11H cabinets for outdoor use.
Steps for fixing floating nuts for RTN 900 installation.
Procedures for mounting the RTN 900 unit into the cabinet.
Details the functionality and types of SLPU surge protection units.
Instructions for installing the SLPU surge protection unit.
Describes the SOU's function and outlet types for different countries.
Guide for installing the SOU (optional component) for AC powered equipment.
Instructions for installing the heater (optional component) for temperature control.
Procedures for installing PGND (protective ground) cables for cabinets and equipment.
Guide for connecting input AC power cables for the APM30H cabinet.
Instructions for installing power cables for the RTN 900 units.
Procedures for installing power cables for battery cabinets.
Instructions for installing power cables for the fan assembly.
Procedures for installing power cables for heating films.
Instructions for installing power cables for the TEC.
Procedures for installing input DC power cables for the TMC11H cabinet.
Instructions for installing RTN 900 DC power cables in TMC11H cabinet.
General guide to routing various service cables within the cabinet.
Steps for connecting E1 cables for data transmission.
Steps for connecting Ethernet cables for network connectivity.
Procedures for connecting IF cables for radio frequency signals.
Guide for connecting optical fiber cables for high-speed data.
Instructions for connecting cables to monitor system signals.
Procedures for connecting cascading cables between RTN 905 devices.
Instructions for sealing cable outlets using the cable outlet module.
Details the sealing method for cable outlet bags.
Methods for sealing cable holes on the cabinet base with baffle plates and mud.
Steps for installing batteries, including safety warnings and power cable connections.
Details connecting power cables to the installed batteries.
Checklist for verifying correct installation of the cabinet and its components.
Checklist for ensuring the surrounding environment is suitable for equipment installation.
Checklist for verifying the correctness of all electrical connections.
Procedure for checking the power-on status of AC and DC power equipment.
Instructions on securing the cabinet door with a locking mechanism.
Step-by-step guide for assembling the power series 120 connector.
Instructions for assembling the easy power receptacle (pressfit type) EPC4 connector.
Procedure for safely removing and replacing fuses using an extraction tool.
Instructions and color codes for repairing paint damage on cabinets.
To Next Page
