Need help?Do you have a question about the Huawei OptiXstar K153-10 and is the answer not in the manual?
Connect optical fibers, network cables, and power cables, then attach the base.
Install the device into a socket panel by securing a bracket behind it.
Install the device into an 86-type electrician box using a bracket.
Secure the mounting bracket to a wall and attach the device.
Connect optical fibers, network cables, and power cables, then attach the base.
Install the device into a socket panel by securing a bracket behind it.
Install the device into an 86-type electrician box using a bracket.
Secure the mounting bracket to a wall and attach the device.
General| Category | Touch terminal |
|---|---|
| RAM | 2 GB |
| Relative Humidity | 5% to 95% (non-condensing) |
| Model | OptiXstar K153-10 |
| Connectivity | Ethernet |
| Power Supply | 12V DC |
| Wi-Fi Standards | 802.11 b/g/n |
| Wi-Fi Frequency | 2.4 GHz |
| Storage Temperature | -20°C to +70°C |
| Interface | USB, HDMI, Ethernet |
To Next Page