Metering Mode Application Scenario
Centre The subject is in the centre of the picture, and
stands out from the background.
Spot The subject to be highlighted in the picture is
relatively small, such as a ower or a tree.
Adjust brightness based on the shooting environment:
l Adjust ISO: Touch , and drag the ISO slider to adjust its value.
To avoid excessive noise, the recommended ISO is below 400. The recommended ISO for the
daytime is between 100 and 200 and around 400 for night scenes.
l Adjust the shutter speed: Touch (shutter speed), and drag the shutter speed slider to your
desired speed.
The recommended shutter speed for static scenes (such as mountains) is between 1/80 and
1/125, and faster for moving subjects (such as waves). For best results, use a tripod when
shooting a moving subject.
l Adjust exposure compensation: Touch
, and drag the EV slider to your desired value.
Adjust AWB: Touch
, and drag the AWB slider to your desired value.
l When shooting under sunlight, you can select . In a weak light environment, you can select
.
l Touch
to adjust the colour temperature. If you want to give your photo a cosy, nostalgic
tone, increase the K value. For a cold, calm or futuristic tone, lower the K value.
Adjust AF based on the shooting subject
: Touch
, and drag the AF slider to your desired
value.
Focusing Mode
Application Scenario
AF-S mode Static scenes (such as mountains)
AF-C mode Moving scenes (such as owing water and waves)
MF mode Protruding objects (such as a close-up of a ower)
Hold your device steady when shooting: Touch and enable Horizontal level. After this
feature is enabled, two horizontal guiding lines will appear on the viewnder. When the dotted line
overlaps with the solid line, the camera is horizontally aligned.
Save RAW format pictures: Go to
> Resolution, and enable RAW format. After this feature is
enabled, photos taken in Pro mode will be saved in both RAW and standard JPG formats.
Exciting Features
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
