Huawei P30 - Enrol a Fingerprint

Enrol a Fingerprint
You can enrol a
ngerprint on your device and then use your ngerprint to unlock your screen and
access your Safe or App lock without a password.
l When your device restarts or your
ngerprint is not recognised, you will need to use your lock
screen password to unlock.
l Before enrolling a ngerprint, make sure your nger is clean and dry.
1 Open Settings.
2 Go to Security & privacy > Fingerprint ID and follow the instructions to set or enter the lock
screen password.
3 Go to New in-screen ngerprint > ADD FINGERPRINT to enrol your ngerprint.
4 Place your ngertip on the ngerprint sensor and hold until your device vibrates. Repeat this step
using different parts of your ngertip.
5 After enrolment is complete, touch OK.
To unlock the screen, simply place your nger on the ngerprint sensor.
Add or Modify a Fingerprint
You can enroll a maximum of ve ngerprints on your device. You can also delete or rename your
ngerprints.
1 Open Settings.
Security and Privacy
87