Huawei P8 - Transferring data between your phone and computer

Network and sharing
62
Sending a file using Wi-Fi Direct
Touch and hold the file you want to send, and then touch Share > Wi-Fi Direct . Your
phone will automatically search for and display available devices. Select the receiving
device.
Receiving a file using Wi-Fi Direct
When a file transfer request is made using Wi-Fi Direct, the File transfer dialog box will
be displayed. Touch
Accept to receive the file. Open the notification panel and touch
Notifications to check the file transfer progress.
By default, received files are saved to the Wi-Fi Direct folder in Files .
Transferring data between your phone and
computer
Connecting using PTP
The Picture Transfer Protocol (PTP) is an image transfer protocol that can be used to
transfer images between your phone and computer, making sharing easier.
1 Use a USB cable to connect your phone to the computer.
2 Swipe down from the status bar to open the notification panel. Set USB connected to
Photos . Any drivers required will be installed automatically on the computer.
Once the drivers are installed, double-click the new drive icon that appears on your
computer to view the images stored on your phone.
Connecting using MTP
The Media Transfer Protocol (MTP) is a communication protocol that can be used to
transfer files between your phone and computer. Before using MTP, make sure you have
Windows Media Player 11 or later installed on your computer.
1 Use a USB cable to connect your phone to the computer.
2 Swipe down from the status bar to open the notification panel. Set USB connected to
Files . Any drivers required will be installed automatically on the computer.
Once the drivers are installed, double-click the new drive icon that appears on your
computer to view the files stored on your phone. You can browse multimedia content on
your phone easily using Windows Media Player.
Downloaded from www.vandenborre.be