Installation Reference
48/49 >>
Installing the Outdoor Optical Splitter
Optional: pole-mounting
Install the pole assembly on the pole.
Assembly
Hold hoop
Loosen the screw on the hold hoop.
Install the pole assembly on the pole.
Tighten the
screw on the
hold hoop.
Tighten the
hold hoop.
Partially
tighten the
hold hoop.
Complete installation of the pole
assembly.
Fix the case on the pole assembly and tighten the lower hold hoop.
Fix the upper end of the case and then the lower end.
Route in and fix cables.
5
Determine the holes through which fibers are routed in and remove the hole
blocks.
Connected to the fiber outlet
on the main RTN 380H.
Connected to the fiber
outlet on the standby
RTN 380H.
Connected to the fiber outlet
on the customer equipment.
Hole blocks
Outdoor fiber trough
Fix hose clamps on outdoor fibers.
Hose clamp
Hooks to fix
hose clamps
4
Tighten the
hold hoop.
1 2
To Next Page
Loading...
