EasyManua.ls Logo

Huawei SmartModule1000A01 - User Manual

Huawei SmartModule1000A01
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
HUAWEI TECHNOLOGIES CO., LTD.
Issue: 04
Part Number: 31500BWV
Date: 2020-05-11
SmartModule1000A01
Quick Guide
Question and Answer IconNeed help?

Do you have a question about the Huawei SmartModule1000A01 and is the answer not in the manual?

Huawei SmartModule1000A01 Specifications

General IconGeneral
BrandHuawei
ModelSmartModule1000A01
CategoryControl Unit
LanguageEnglish

Summary

1 Overview

2 Installation Requirements

Dimensions

Details the physical dimensions of the SmartModule for installation planning.

Space

Specifies the required clearance space around the SmartModule for ventilation and access.

3 Device Installation

Wall-Mounted Installation

Provides instructions for mounting the SmartModule and SmartLogger on a wall.

Guide Rail-Mounted Installation (Stand-alone)

Details how to install the SmartModule and SmartLogger on a 35 mm guide rail.

Guide Rail-Mounted Installation (Combined)

Instructions for installing combined SmartLogger and SmartModule units on a guide rail.

4 Electrical Connections

4.1 Preparing Cables

Lists cable types and their recommended specifications for connection.

4.2 Connecting the PE Cable

Guides on how to properly connect the protective earthing (PE) cable.

4.3 Connecting the Ethernet Cable

Explains how to connect the SmartModule using an Ethernet cable for data communication.

4.4 Connecting the 12 V Input Power Cable

Details connecting the 12 V input power cable for the SmartModule.

4.5 Connecting the RS485 Communications Cable

Instructions for connecting RS485 communication cables to devices like solar inverters.

Cascading Connection

Describes how to connect multiple devices in a cascading RS485 network.

4.6 Connecting the DI Signal Cable

How to connect Digital Input (DI) signal cables for commands and alarms.

4.7 Connecting the Output Power Cable

Instructions for connecting the output power cable to drive relays or alarms.

4.8 Connecting the AI Signal Cable

Guides on connecting Analog Input (AI) signal cables for voltage or current measurements.

4.9 Connecting the PT Signal Cable

Details on connecting PT100/PT1000 temperature sensors using three-wire or two-wire systems.

Two-Wire System

Specific instructions for connecting PT100/PT1000 sensors using a two-wire configuration.

4.10 Connecting the 24 V Input Power Cable

Explains how to connect the 24 V input power cable for various scenarios.

5 Check Before Power-On

6 Powering On the System

7 FAQ

7.1 The SmartModule Cannot Be Powered On

Troubleshooting steps for when the SmartModule fails to power on.

7.2 RST Button

Explains the functions and operations of the RST button for system reset and recovery.

7.3 Replacing the SmartLogger2000 with the SmartLogger3000

Guidance on replacing an older SmartLogger model with a new one.

Related product manuals