EasyManuals Logo

Huawei S6700 Series Quick Maintenance Guide

Huawei S6700 Series
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Check for Critical or Major Alarms on the Switch
4
Log in to the switch and run the display alarm active command to view the alarm status on the switch.
Check whether any critical or major alarms exist.
<HUAWEI> display alarm active | include Critical
A/B/C/D/E/F/G/H/I/J
A=Sequence, B=RootKindFlag(Independent|RootCause|nonRootCause)
C=Generating time, D=Clearing time
E=ID, F=Name, G=Level, H=State
I=Description information for locating(Para info, Reason info)
J=RootCause alarm sequence(Only for nonRootCause alarm)
3/Independent/2014-04-18 16:59:13-05:13/2014-04-18 16:59:17-05:13/0x502001/lin
kDown/Critical/End/OID 1.3.6.1.6.3.1.1.5.3 Interface 28 turned into DOWN state.(
AdminStatus 1,OperStatus 2,InterfaceName GigabitEthernet0/0/24)
4/Independent/2014-04-18 16:59:13-05:13/2014-04-18 16:59:17-05:13/0x502001/lin
kDown/Critical/End/OID 1.3.6.1.6.3.1.1.5.3 Interface 57 turned into DOWN state.(
AdminStatus 1,OperStatus 2,InterfaceName Vlanif4094)
The alarms on the switch are classified into critical, major, minor, and warning alarms. The critical and
major alarms must be handled immediately. Handle these alarms according to the Alarm Reference. If
the alarms cannot be cleared, contact your agent or Huawei enterprise technical support hotline.
If you have a network management system (NMS), check the alarms on the NMS.
For details, see the NMS product documents.

Other manuals for Huawei S6700 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei S6700 Series and is the answer not in the manual?

Huawei S6700 Series Specifications

General IconGeneral
BrandHuawei
ModelS6700 Series
CategorySwitch
LanguageEnglish

Related product manuals