The microphone is used only for sound pickup during a call.
Currently, the microphone is not enabled.
Network configuration for the speaker
After network configuration is complete for the speaker, features
requiring a Wi-Fi connection (including firmware updates and UPnP
wireless audio connection) will be available.
Installing the HUAWEI AI Life App
Scan the QR code below with your phone or search for “AI Life” in
HUAWEI AppGallery, and download and install the HUAWEI AI Life
app.
Make sure that the app is the latest version if it has already been
installed. The HUAWEI AI Life app is only supported in the
Android system.
Connecting to a power source
Connect the speaker to a power source. When the ring indicator
flashes orange, the speaker is ready for network configuration.
If the indicator does not flash orange, press and hold the Mute
button until it does so.
Adding the speaker
1 Connect your phone to a Wi-Fi network.
2 On the home screen of the HUAWEI AI Life app, touch +, add the
Sound speaker, and the app will automatically search for the
speaker.
If the app fails to detect the device, follow the onscreen
instructions to manually add the speaker.
3 Follow the onscreen instructions to configure the network for the
speaker.
After the network configuration is complete, a card for the
speaker will be displayed on the home screen of the AI Life app.
Touch the card to access the device control screen. You can now
control the speaker and update its firmware.
Explore for more features
Speaker features
• Bluetooth audio playback
• OneHop Audio Sharing
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
