Figure 7-9 Feature parameters
Table 7-3 Feature parameters
Parameter
Description
MPPT multi-peak scanning When the SUN2000 is used in scenarios where PV strings are
obviously shaded, enable this function. Then the SUN2000 will
perform MPPT scanning at regular intervals to locate the
maximum power.
The scanning interval is set by MPPT multi-peak scanning
interval.
MPPT multi-peak scanning
interval (min)
Species the MPPT multi-peak scanning interval.
This parameter is displayed only when MPPT multi-peak
scanning is set to Enable.
SUN2000-(100KTL, 110KTL, 125KTL) Series
User Manual 7 Man-Machine Interactions
Issue 07 (2020-09-15) Copyright © Huawei Technologies Co., Ltd. 79
To Next Page
Loading...
