Need help?Do you have a question about the Huawei SUN2000-100KTL-M2 and is the answer not in the manual?
General| Rated Output Power | 100 kW |
|---|---|
| Max. DC Power | 110 kW |
| Max. DC Voltage | 1100 V |
| Start Voltage | 200 V |
| MPPT Voltage Range | 200 V - 1000 V |
| Max. Efficiency | 98.6% |
| MPPT Efficiency | 99.9% |
| Number of MPPT Trackers | 2 |
| Rated AC Voltage | 400 V |
| Rated AC Grid Frequency | 50 Hz / 60 Hz |
| Power Factor Adjustment Range | 0.8 leading - 0.8 lagging |
| Total Harmonic Distortion (THD) | < 3% |
| DC Reverse-Polarity Protection | Yes |
| AC Overcurrent Protection | Yes |
| AC Short-Circuit Protection | Yes |
| DC Insulation Monitoring | Yes |
| Residual Current Monitoring | Yes |
| AC Overvoltage Protection | Yes |
| Operating Temperature Range | -25 °C to +60 °C |
| Operating Altitude | 4000 m |
| Protection Degree | IP65 |
| Ingress Protection | IP65 |
| Output Voltage | 400 V |
| Output Frequency | 50 Hz / 60 Hz |
| Input Voltage Range | 200 V - 1000 V |
| Relative Humidity | 0% - 100% |
| Humidity Range | 0% - 100% |
| Communication Interfaces | RS485, Ethernet |
To Next Page
