2
1. Visually inspect the UPS packing box for shipping damage.
2. Open the UPS package, check all attachments are complete for UPS.
3. Take out the UPS, then place the UPS on a stable mounting surface.
2
Installing a Single UPS
1. Use fully insulated tools during installation and operations.
2. Only engineers certified by the manufacturer or its agents are allowed to perform UPS
installation, commissioning and maintenance. Otherwise, personal injury or equipment damage
may occur, and the resulting UPS faults are beyond warranty scope.
3
Installing Cables
Installing the UPS Output Power Cables
3.1
For socket-type output, connect loads to the UPS output sockets.
Before installation, read the UPS2000-A-(1 kVA-3 kVA) User Manual to
get familiar with UPS information and safety precautions. UPS is short
for uninterruptible power system.
2KTTL/2KTTL-01
3KTTL/3KTTL-011KTTL/1KTTL-01
1KTTS/1KTTS-01
2KTTS/2KTTS-01
3KTTS/3KTTS-01
To Next Page
Loading...
Need help?
General