6
6. How do I connect my router to the HUAWEI CPE to expand the Wi-Fi network?
You can connect your router in either of the following ways:
· Wired connection
Place your router in a room with weak or no signal strength, then connect the WAN port of
your router to the LAN port of the HUAWEI CPE using an Ethernet cable.
· Wireless connection (using the H button)
Step 1: Place the router within one meter of the HUAWEI CPE and connect the power supply.
Step 2: When the indicator on the HUAWEI CPE starts to ash, press the H button on it. Wait
until the indicator on the router shows that the router is connected to the network.
Step 3: Place the router in a room with weak signal strength and connect the power supply.
• The gure is for reference only.
• Ensure that the HUAWEI CPE is connected to the Internet, and the router is new or
restored to factory settings.
• Ensure that the HUAWEI CPE supports the HUAWEI HiLink function and CoAP protocol.
Please consult the distributor for details.
• Ensure that the distance between your router and the HUAWEI CPE is less than 10
meters and there are no more than two walls in between.
within one meter
To Next Page
Loading...
