Huawei WS5200 User Manual

8
2. What should I do if I forget my login password for the app or the router's web-based management page?
4. How do I pair a Wi-Fi device with my HUAWEI WiFi WS5200 using WPS?
3. How do I restore the HUAWEI WiFi WS5200 to its factory settings?
Try using the router's Wi-Fi password to log in. If the issue persists, restore the router to its factory settings.
When your HUAWEI WiFi WS5200 is powered on, press its H button, and then press the WPS button on the Wi-Fi device (such as
a phone) within two minutes to initiate standard WPS negotiation and incorporate the Wi-Fi devices into the router's Wi-Fi network.
Connect the router to the power supply and wait until the router completes the startup process. Use a needle or pin to press the
RESET
button on the router for more than two seconds until the indicator light goes out. Wait for the router to complete the restart
process. When the indicator turns red, this indicates that the router has been restored to its factory settings.
All settings will be cleared if the router is restored to its factory settings. You will need to re-congure the router.

Huawei WS5200 Specifications

General

Ethernet WAN	Yes
SIM card slot	-
WAN connection type	RJ-45
Wi-Fi standards	Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	- Mbit/s
Networking standards	IEEE 802.11s, IEEE 802.11v
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Antennas quantity	4
Product type	Tabletop router
Product color	White
Output current	1 A
Output voltage	12 V
Power source type	DC
Power consumption (typical)	12 W
Security algorithms	WPA-PSK, WPA2-PSK

Weight and Dimensions

Depth	120 mm
Width	205 mm
Height	36.8 mm