Configuring the WS550 using a phone
Open the browser on your phone, visit
192.168.3.1, and touch Go.
I’ve read and agree to theTerms of
Service
Welcome to Huawei WS550
-U
Check the SSID on the label attached to
the bottom of the WS550 (unencrypted
by default), and then wirelessly connect
your phone to the WS550's Wi-Fi
network.
You can configure the WS550 using a phone, tablet, or laptop. This guide uses a phone
as an example.
32
SSID: HUAWEI-XXXXXX
LAN1 LAN2 LAN3 LAN4 WAN
WPS/
ResetOn/Off Power
WS550
3
2
PC
Smartphone
Tablet
Laptop
1
Network
cable
Power cable
Network
cable
Connect your devices in the sequence indicated in the following figure. To power on
the WS550, press its On/Off button.
1
How to restore default settings: When the WS550 is powered on, use a needle to press and hold
the WPS/Reset key for 6 seconds or more until the indicator becomes off.
For more information, visit http://consumer.huawei.com/en/.
You can also connect your WS550 using a network cable and configure it on the computer.
WS550 Quick Start_en_105x148.indd 1 2015/5/15 17:46:37
To Next Page
Need help?
General
