18
Indicator
Steady green
Steady red
Flashing
Connected to the network
Not connected to the network
• Loose cable or connect error. Check the cable.
• Broadband network error. Contact your broadband network provider.
The router has detected a pairable device.
When other HUAWEI devices (support HarmonyOS Connect) , the indicator
on the HUAWEI WiFi AX3 will ash. When this happens, press the HUAWEI
WiFi AX3's H button. The indicator should flash quickly, indicating that the
pairable device is connecting to the HUAWEI WiFi AX3. The connection
process is complete when the indicator stops ashing.
• If you touched the H button by accident, wait for 2 minutes till the indicator
returns to normal.
• The H button also features WPS functionality.
Manage the router with our mobile app
Scan the QR code to download and install the HUAWEI AI Life App
on your mobile phone or tablet. You can use the app to manage
your router.
on the HUAWEI WiFi AX3 will ash. When this happens, press the HUAWEI
WiFi AX3's WPS/RESET button. The indicator should ash quickly, indicating
connection process is complete when the indicator stops ashing.
To Next Page
Loading...
