Huawei Y3II - Phone Settings; Turning on Location Services; Modifying Tone Settings

51
Phone settings
Turning on location services
Before you use a map or navigation application, make sure you have turned on location
services.
1. On the home screen, touch .
2. Under All, touch Location.
3. Touch to turn on your phone's location services.
4. Touch Mode. You can then:

Touch High accuracy to locate your position using GPS, Wi-Fi, and cellular networks.

Touch Battery saving to locate your position using Wi-Fi and cellular networks.

Touch Device only to accurately locate your position using GPS.
Modifying tone settings
1. On the home screen, touch .
2. Under All, touch Sound.
3. On the Sound screen, you can:

Touch Volume and drag the sliders to adjust the volume of Ringtone, Media, Alarms, Call.

Touch Silent mode to turn silent mode on or off.

Touch Vibrate in silent mode to enable or disable vibration when your phone is in silent
mode.

Touch Phone ringtone to select a ringtone. If your phone has dual SIM support, you can
set different ringtones for each SIM card.

Touch Vibrate when ringing to enable or disable vibration when your phone rings. If
your phone has dual SIM support, you can apply different vibration settings for each SIM
card.

Touch Default notification ringtone to set a notification tone.

Under System , touch the switches to enable or disable the notification tone or vibration
when you touch or lock the screen, dial a number, and more.