Huawei Y7p - Data Transfer via USB and Huawei Share

Connect your Phone to your Computer using a USB cable to transfer data and perform other
tasks.
• Transfer les: Media Transfer Protocol (MTP) is a type of transmission protocol for media
les. You can transfer les between your Phone and computer using this connection
method. First, install Windows Media Player 11 or later on your computer.
Swipe down from the status bar to open the notication panel, and then set your USB
connection method to Transfer les. Your computer will automatically install the necessary
drivers. After the installation is complete, click the new drive icon named Phone on the
computer to view the les on your Phone. You can use Windows Media Player to view the
media les on your Phone.
• Transfer images: Picture Transfer Protocol (PTP) is a protocol that allows you to transfer
images. You can upload and share photos between your Phone and computer using this
connection method.
Swipe down from the status bar to open the notication panel, and then set your USB
connection method to Transfer photos. Your computer will automatically install the
necessary drivers. After the installation is complete, click the new drive icon named Phone
on the computer to view the images on your Phone.
• Transfer MIDI data to your Phone: MIDI (Musical Instrument Digital Interface) is an
industry standard audio format for composing music established by electronic instrument
manufacturers.
Swipe down from the status bar to open the notication panel, and then set your USB
connection method to Input MIDI. You can then use Phone to receive and process MIDI
messages transmitted by other devices.
Huawei Share
Use Huawei Share to Quickly Share Files Between Huawei Devices
You can use Huawei Share to quickly transfer photos, videos and other
les between Huawei
devices. Huawei Share uses Bluetooth to detect other nearby Huawei devices and then uses
Wi-Fi Direct to quickly transfer les without using mobile data.
Huawei Share uses Wi-Fi and Bluetooth to transfer data. When Huawei Share is enabled,
both Wi-Fi and Bluetooth are automatically enabled.
Use Huawei Share to send les: Select the les you want to share and then touch Share. To
send les, select a receiving device from the list of nearby devices and conrm.
Use Huawei Share to receive les: Swipe down from the status bar to open the notication
panel, and then touch to enable Huawei Share. Touch ACCEPT when the le transfer
notication is displayed. Received les are saved by default to your Huawei Share folder in
Files.
No conrmation is required if the two Huawei devices have been logged in using the
same HUAWEI ID.
Device Connection
60