To Next PageTo Next PageWhat to do if my Huayu HY-1000-Plus is blinking red three times?
If the Huayu Inverter is blinking red three times, this indicates a grid failure. You should check the grid connection to resolve this issue.
What does it mean if my Huayu Inverter is flashing a red LED four times?
If the Huayu Inverter LED is flashing red four times, it indicates a Ground Fault Detector Interrupter (GFDI) error. You should clear the GFDI error to fix this.
Why is my Huayu Inverter blinking red two times?
If your Huayu Inverter is blinking red twice, it means there's an AC low-voltage or high-voltage issue. Check the voltage levels to resolve this problem.
How to fix no data display on Huayu HY-1000-Plus Inverter?
If your Huayu Inverter displays no data, check the network configuration.
What to do if Huayu HY-1000-Plus is flashing red with no power?
If the Huayu Inverter is flashing red and has no power, check for power supply issues.
Why does my Huayu Microinverter show online but no data?
If the display shows the Huayu Microinverter is online but there is no data, the server might be updating. Wait for the server updates to complete.
What does it mean when my Huayu HY-1000-Plus Inverter shows 0 watts or 2 watts?
If your Huayu Inverter is showing 0 watts or 2 watts, it could indicate a Microinverter problem.
What does a red light on my Huayu Microinverter mean?
If there is a red light (blinking or solid) on the Huayu Microinverter, it definitely indicates a Microinverter problem.
What does it mean when my Huayu HY-1000-Plus has more than two short red blinks after DC power?
Greater than two short red blinks after DC power indicates a failure of microinverter setup.
General
