To Next PageTo Next Page
Need help?Do you have a question about the Hubbell GAI-Tronics 1193 and is the answer not in the manual?
General| Category | IP Phone |
|---|---|
| Model | 1193 |
| Manufacturer | Hubbell GAI-Tronics |
| Enclosure Rating | NEMA 4X, IP66 |
| Audio Input | Built-in Microphone |
| Communication Protocol | SIP |
| Network Interface | 10/100 Base-T Ethernet |
| Material | Stainless Steel |
| Operating Temperature | -40°C to +60°C |
| Mounting | Wall |
| Power Supply | PoE (Power over Ethernet) |
Alert if illuminated panel fails or disconnects, triggers input 4 and SNMP trap.
Alert and illumination off if handset integrity loop is broken, e.g., handset damaged or torn off.
General guidelines for mounting, including cable routing, gland selection, and ensuring a weatherproof seal.
Step-by-step instructions and dimensions for securely mounting the telephone on a wall surface.
Instructions for mounting using a pole mounting clamp kit, suitable for round poles and uprights.
Emphasizes critical importance of waterproof seal during installation to prevent water ingress and electrical hazards.
Crucial safety warnings for hazardous voltages, double insulation, cable specifications, and suitable supply.
Step-by-step process for preparing, mounting the rear enclosure, and routing cables for installation.
Details on making electrical connections, including LAN, input, output, and DC power supply terminals.
Specifies dimensions and material for creating the custom legend panel used for identification.
Instructions on how to slide and fit the legend panel correctly into the telephone's faceplate slot.
Recommended cleaning agent for general maintenance of the telephone unit.
Care instructions for stainless steel push-buttons, especially in marine environments.
Recommended graffiti remover for paint and ink, with caution for aggressive chemicals.
