To Next PageTo Next PageHow to fix crosstalk on Hubbell Emergency Phone?
If you're experiencing crosstalk, it might be due to one or more system cable pairs being improperly terminated. Visually inspect the system cable connections for accidental crossing of the cable pairs or grounds.
What to do if feedback occurs during paging on a Hubbell Emergency Phone?
If feedback occurs during paging, use the muting feature in the amplifier enclosure at the terminal blocks as detailed in the enclosure manual.
How to adjust incoming conversation level on Hubbell Emergency Phone?
To adjust the incoming conversation level, adjust the receiver volume control at the remote amplifier or replace the receiver element in the handset.
How to adjust outgoing conversation level on Hubbell Emergency Phone?
To adjust the outgoing conversation level, adjust the microphone gain at the remote amplifier or replace the handset microphone.
How to adjust sidetone on Hubbell Emergency Phone?
To adjust the sidetone (how the operator hears themself), adjust the receiver sidetone at the remote amplifier. Also, check the wire terminations for proper connections in the line balance assembly.
General| Model | 711-102 |
|---|---|
| Manufacturer | Hubbell GAI-TRONICS |
| Weatherproof Rating | NEMA 4X |
| Power | 12W |
| Category | Emergency Communication |
| Compliance | ADA, FCC |
Overview of the desk-edge subsets, their purpose, and key features.
Lists features and functions for Page/Party and SmartSeries systems.
Details the external subassemblies of the desk-edge subsets.
Illustrates the signal routing within the subset using a block diagram.
Steps for making a page announcement in a single-party system.
Steps for making a page announcement in a multi-party system.
Controls the microphone gain for audio output.
Controls the receiver volume level for the handset.
Details additional controls affecting system performance.
