Need help?Do you have a question about the Huber KISS Series and is the answer not in the manual?
General| Brand | Huber |
|---|---|
| Model | KISS Series |
| Category | Control Unit |
| Language | English |
Overview of the control panel's displays and input keys.
Details the general and other functions of the temperature control unit.
Information and safety notes regarding the use of thermal fluids.
Considerations for planning tests and system performance.
Explanation of the control panel's display and various control instruments.
Overview of the main menu structure and available settings.
Practical examples of setting language, setpoint, and auto-start.
List of fault codes, their causes, and recommended actions.
Location and troubleshooting of thermal overcurrent circuit breakers.
Guidelines for cleaning, visual inspection, and maintenance intervals.
Basic health and safety requirements of European Directives.
Safety instructions, symbols, proper operation, and misuse.
Obligations of the responsible body and operators.
General information on the workstation, safety devices and power interruption.
Instructions for moving the temperature control unit within a facility.
Procedure for unpacking the temperature control unit and checking for damage.
Requirements for suitable ambient conditions for operation.
Notes on electrical safety and electromagnetic compatibility (EMC).
Requirements for connecting the unit to the power supply.
Guidelines for selecting and using hoses.
Table of wrench sizes and torques for pump connections.
Specifics for units equipped with a cooling coil.
Operating the unit as a bath thermostat.
Steps to prepare the unit for operation.
Procedure for connecting the functional earth terminal.
How to connect external applications.
Instructions for connecting the unit to the power supply.
Overview of standard interfaces on the top side of the unit.
Details on the USB-2.0 connection for computer communication.
Description of the RS232 jack for PC or PLC connection.
Information on connecting an optional external temperature sensor.
Overview of interfaces located at the back of the unit.
Details on RS232 communication, transmission format, and LAI commands.
Essential safety guidelines before shutting down the unit.
Procedure for safely switching off the temperature control unit.
Steps to drain the unit's internal fluid.
Procedure for draining cooling water from water-cooled units.
How to remove the collecting container.
Steps to disconnect an external application.
Guidelines for packing the unit for transport or storage.
Requirements for transporting the temperature control unit correctly.
Instructions for proper disposal of the unit and its materials.
To Next Page
