Need help?Do you have a question about the Huber MPC Minichiller 280 and is the answer not in the manual?
General| Brand | Huber |
|---|---|
| Model | MPC Minichiller 280 |
| Category | Industrial Equipment |
| Language | English |
Explains identifications and symbols used in the manual.
Information on equipment compliance with European Directives.
Covers safety instructions, identifiers, proper operation, and misuse.
Defines roles, responsibilities, and requirements for operators and bodies.
Covers disposal of resources, NR, and F-gas refrigerant safety.
Explains safety devices, protective measures, and operator requirements.
Covers transporting, lifting, leveling feet, and positioning the unit.
Steps for unpacking and required ambient operating conditions.
Covers installation site requirements and electromagnetic compatibility notes.
Details wrench sizes, torques, and specific setup for water cooling.
Covers leveling feet, silent operation, containers, earth, apps, and power.
Overview of general and other functions of the temperature control unit.
Important considerations when planning tests and system setup.
Description of the control panel, including display, LEDs, and keys.
Examples of how to display, set, or change setpoints and auto-start functions.
Steps for turning the unit on/off and setting overtemperature protection.
Procedure to test if the overtemperature protection is working correctly.
Procedure to set or adjust the desired temperature setpoint.
Detailed steps for filling, venting, and draining the unit's fluid circuits.
Methods for filling and venting using sight glass or level indicator.
Steps for draining the unit using sight glass or level indicator/drain.
Details on automatic operation, starting, and ending temperature control processes.
Information on connecting optional interfaces, including RS232 jack.
Explanation of unit displays showing faults, errors, and their effects/measures.
Routine checks and inspections for hoses, fluid levels, cables, and seals.
Procedure for replacing hoses and cleaning liquefier fins.
Instructions for cleaning strainers and general thermal fluid maintenance.
Procedures for replacing thermal fluids and rinsing the circuit.
Instructions for cleaning unit surfaces, plug contacts, and inspecting seals.
Procedures for decontaminating units before repair or return.
Essential safety precautions before and during unit shutdown.
Procedures for draining the temperature control unit and its cooling water.
Steps for removing applications, packing, and preparing the unit for shipping.
Information on proper unit disposal and contact details for support.
To Next Page
