hubs dome - Principles; Only clamp-up hubs when the dome is in its final position

Principles
These are useful things to remember
to help the build go smoothly.
3
Insert from below
1
It takes two
One can connect
as the other lifts.
Insert and remove ball
connectors in this alignment.
2
Stay on the outside
during the build
4
Lift the hub above to
enable connection
!
5
Lift by the sticks
above the hub
6
Only clamp-up hubs
when the dome is in
its fi nal position
Moving the dome whilst
clamped-up will damage the
hubs and ball connectors!
Use two
if you can
On its base
Won’t
connect
+