Need help?Do you have a question about the Hubsan X4 FPV BRUSHLESS and is the answer not in the manual?
General| Easy to use | Yes |
|---|---|
| Product color | Gold, White |
| Frequency band | 2.4, 5.8 GHz |
| Number of rotors | 4 rotors |
| Maximum weight capacity | - kg |
| Supported video modes | 1080p |
| Maximum video resolution | 1920 x 1080 pixels |
| Flight modes | Follow Me mode |
| Moving control functions | Backward, Downward, Forward, Turn left, Turn right, Upward |
| Motor type | Brushless |
Explains the quadcopter's flight control system, GPS, and compass functions.
Details the indicator status for power on, calibration, flight modes, and low battery.
Introduces the rechargeable LiPo battery, its capacity, voltage, and charging requirements.
Provides instructions on how to correctly install the battery into the quadcopter's compartment.
Explains the battery charging process, indicator lights, and estimated charging time.
Introduces the 7.3-inch propellers marked A and B and the need for timely replacement.
Guides on assembling propellers onto the motor threads matching the correct letter and locking them.
Instructs on how to remove propellers by unlocking them counter-clockwise.
Details the functions of various controls and buttons on the transmitter for controlling the quadcopter.
Provides step-by-step instructions for installing batteries into the transmitter.
Explains the procedure for calibrating the transmitter sticks for accurate control.
Guides on how to select the optimal frequency for live video transmission to minimize interference.
Advises on suitable flying areas, avoiding obstacles, and weather conditions.
Lists essential checks to perform before each flight, such as battery charge and propeller installation.
Details the procedure for linking the transmitter and quadcopter if they are not already paired.
Explains the importance and process of calibrating the compass for optimal flight performance.
Outlines the step-by-step procedure for compass calibration using the transmitter and quadcopter.
Guides on how to reverse transmitter stick functions for personalized control.
Explains how to adjust the sensitivity of transmitter stick functions for different flight modes.
Details how to enable manual mode for acrobatic flights, disabling altitude functions.
Describes how to activate headless mode, where the quadcopter's direction is relative to the transmitter.
Explains the follow me mode, where the quadcopter automatically follows the transmitter using GPS.
Details the Return To Home (RTH) function, which brings the quadcopter back to the takeoff point.
Explains the failsafe mode, activated when the transmitter connection is lost, returning the quadcopter home.
To Next Page
