Need help?Do you have a question about the Hubsan X4 CAM PLUS H107C+ and is the answer not in the manual?
General| Control Range | 100 meters |
|---|---|
| Camera | 720p |
| Video Resolution | 1280 x 720 |
| Flight Time | 7 minutes |
| Battery | 3.7V LiPo |
| Transmitter Battery | 4 x AA batteries (not included) |
Emphasizes the quadcopter is not a toy, requires personal safety awareness, and recommends experienced pilot supervision for beginners.
Warns about high-speed rotating blades, danger of injury, and the need for open spaces free from obstacles.
Provides crucial safety advice for handling Lithium-Polymer batteries, including storage and charging precautions.
Instructions for proper disposal and recycling of Lithium-Polymer batteries according to local regulations.
Specific checks include charged batteries, throttle position, rotor blades, and secure battery connection.
Step-by-step instructions for removing and installing LEDs, including soldering wire connections.
Procedures for motor issues after a crash, motor failure, and correcting drifting via accelerometer calibration.
Instructions for proper disposal and recycling of Lithium-Polymer batteries according to local regulations.
Details the components and functions of the transmitter's main menu screen and controls in Mode 1 and Mode 2.
Diagram showing all parts of the HUBSAN X4 quadcopter with corresponding numbers.
Explanation of how each control stick and button on the transmitter affects the quadcopter's flight.
Instructions for calibrating the transmitter sticks in both Mode 1 and Mode 2 for optimal control.
Guide for correctly installing AAA batteries into the transmitter, advising against mixing old/new or different battery types.
How to start and stop video recording using the quadcopter's power button and SD card slot LED indicators.
Instructions for taking photos and recording videos using the buttons on the transmitter.
Explanation of the safety feature that prevents motors from starting without a valid control signal.
Description of LED lights for pairing status and the low battery alarm system that initiates an automatic landing.
Guide to adjusting control sensitivity for Rudder, Elevator, and Aileron trims via the transmitter's SE menu.
Explanation of Headless Mode, how to activate/deactivate it, and its effect on quadcopter orientation.
Details how throttle and rudder sticks control altitude, hover, and fuselage rotation.
Instructions to reverse control channels for Elevator, Aileron, and Rudder trims via the transmitter.
How to activate Expert Mode for enhanced performance and responsiveness compared to the default Normal Mode.
Guide on how to enter Flip Mode and execute Left, Right, Forward, and Backward flips using control stick inputs.
To Next Page
