Page 12 of 15
Ver 1.2 11/20
In this example, you can see the HuddleCamHD camera in use connected as a fully
functional USB 3.0 device (HuddleCamHD) as well as a USB 2.0 device with limited
functionality (USB2.0 Camera).
If your device has not connected to or has not recognized the HuddleCamHD camera as an
imaging device (in which case, you may see a new “unknown device”, “Westbridge” or
“CYTFX3” labeled device show up in Device Manager’s “Universal Serial Bus Controllers”
section rather than in the “Imaging Devices” section), the HuddleCamHD camera will not be
available to programs that utilize a camera. In this case, try restarting the device and
reconnecting the camera via USB (USB 2.0 or USB 3.0 depending upon HuddleCamHd
camera).
Similarly, you can see a connected device in System Information on a MAC. See screenshot
below:
To Next Page
Loading...
