HuddleCamHD 10X-USB2 - OSD Menu Configuration Options; Dome OSD Menu Settings

Page 6 of 15
Ver 1.2 11/20
OSD MENU……………………………………………………………………………………………..
On Screen Display Menu – Use the OSD menu to access and change the camera’s
settings.
Note: You cannot manually move the camera (pan / tilt) when the OSD menu is
visible on the screen.
The Dome OSD Menu is as follows:
• Protocol
o Dome Address Default: 1
▪ 1 - 7
o Dome Protocol Default: VISCA
▪ VISCA, PELCO-D
o Baud Rate Default: 9600
▪ 2400, 4800, 9600, 38400
• Settings
o IR Address Default: 1
▪ 1 - 3
o Pan Speed Default: 11
▪ 1 - 24
o Tilt Speed Default: 11
▪ 1 - 18
o Preset Freeze Default: Off
▪ On, Off
o Preset Resume Default: Off
▪ Off, 30, 60, 90
• Information
o Version
o Model
o Date
• Language
o English