S02CG/S02CR
Safety Instructions
Please read thoroughly and comply with the Safety Instructions and User Manual before
using this product. Failure to read and follow may void the warranty.
WARNING!
CLASS
COMPLIES WITH CFR 1040.10 AND 1040.11
Max. Power Output: <1mW
Wavelength: 505nm-660nm
LASER RADIATION:
DO NOT STARE INTO BEAM.
DO NOT DIRECT EYE EXPOSURE.
AVOID VIEW WITH OPTICAL INSTRUMENTS.
ATTENTION:
Read all instructions prior to operating this laser tool. Do not remove any labels from tool.
• While the product is in operation, be careful not to expose your eyes to the emitting laser
beam (Green/Red light source). Exposure to a laser beam for an extended time may be
hazardous to your eyes.
• Do not attempt to view the laser beam through optical tools such as telescopes as
serious eye injury may result.
• Do not disassemble or modify the laser in any way. Modifying the tool may result in
hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to operate the laser. Serious
eye injury may result.
• An exposure to the beam of a Class 2 laser is considered safe for a maximum of 2
seconds. Eyelid reflexes will normally provide adequate protection.
• The following label/print samples are placed on the product to inform of the laser class
for your convenience and safety.
To Next Page