5
• Tighten Quick Release lock (3).
WARNINGS:
• The Quick Release Lock (3) and
Nut (3a) MUST be suffi ciently tight-
ened to hold the unit in the upright
position.
• Failure to obey this warning may
cause the handlebar to fold while
riding, and may cause serious
injury to the rider or others.
3a
• Insert the handgrips (4) into the handlebar (5). Ensure the lock buttons
(6) on each handgrip are fully engaged with the Locking Hole Stops (7) in
each side of the handlebar.
• Release Quick Release Lock (8)
To Next Page
Loading...
