Huffy True Timber User Manual

12
IMPORTANT! Before using the unit for the  rst time the battery needs to
be charged for at least 8 to 12 hours - no more than 20 hours. Once battery
is depleted, recharge for 8 to 12 hours - no more than 20 hours.
Charging the Drive Battery:
IMPORTANT!
Check the drive battery and charger (supply
cord, connector) for wear and damage
before charging. Do not charge the battery if
damage has occurred. Only replace with the
same type and voltage rechargeable battery
and charger supplied by the manufacturer.
• Only use the rechargeable battery (or
equivalent replacement) and charger sup-
plied with your vehicle.
• Always turn power off and charge battery
after riding.
• The drive battery should be charged when
depleted, or if not used regularly, once a
month. Failure to charge the battery as
directed will cause permanent damage to
the battery and will void the warranty.
STEPS:
1. Ensure power is OFF.
2. Locate Charging Port
A
.
3. Plug Charger plug into unit Charging
Port.
4. Plug Charger into Wall outlet
B
.
5. When battery is fully charged, un-
plug charger from the wall outlet and
disconnect from charger port.
NOTE: The charger may feel warm during
the charging. If excessively hot, unplug and
replace.
NOTE: This product has charging protection:
When charging, drive functions are turned
OFF.
Operation
Operation
WARNING: Read and understand ALL warnings in front of this manual before
using this product! Make sure child fully understands how to operate vehicle.
IMPORTANT!
Always stop vehicle
when changing the
speed or direction to
avoid damage the
gear box and motor.
(1) Press the Forward button to go forward.
(2) To stop, release the button. The unit will gradually stop using motor friction.
Circuit
diagram

Huffy True Timber Specifications

General

Brand	Huffy
Model	True Timber
Category	Motorized Toy Car
Language	English