Hughes & Kettner FSM-432 MK III User Manual

Manual 1.3
• English • Deutsch • Français • Italiano • Español
• にほんご
• 中文中文

Hughes & Kettner FSM-432 MK III Specifications

General

Number of Presets	128
Type	MIDI Foot Controller
Compatibility	Hughes & Kettner amplifiers with MIDI capability
Display	LED
Footswitches	4
Power Source	9V DC

Summary

General Information

Operating the FSM-432 MK III

2.1 Preset Button Operation

Explains how preset buttons A, B, C, D select presets within a bank.

2.2 Bank Navigation

Details using Up/Down buttons to navigate and select presets in different banks.

Direct Mode Operation

Describes Direct Mode for immediate program changes via Bank Up/Down buttons.

2.3 Tap Tempo Function

Explains using the Tap button to set delay time in sync with the beat.

2.4 Mode Switch: Preset/Stompbox

Details switching between Preset and Stompbox modes using the rear slide switch.

2.5 MIDI In Connectivity

Explains MIDI In for connecting external MIDI devices and merging information.

2.6 Control Inputs 1 and 2

Covers connecting expression pedals or footswitches for remote control functions.

Assigning Controller Numbers

Control 1 Assignment

Procedure for accessing edit mode and assigning controller numbers to Control 1.

Control 2 Assignment

Procedure for accessing edit mode and assigning controller numbers to Control 2.

Additional Functions

Combined Button Functions

Explains special functions accessed by holding Tap with preset buttons.

Power On Functions

Details special functions accessed by holding buttons during power on.